After using Geneanet Upload, the AKA information for the person shown in the screenshot is missing at the top near the picture but has been put with the address information into the notes.
The relevant part of the GEDCOM file is in the second file attached.
Please can you help?
AKA information misplaced after GENEANET Upload.
-
- Posts: 17
- Entry mode: Graphic
- Browsing: Graphic
- View their family tree
- Attachments
-
- Part of GEDCOM file.rtf
- (782 Bytes) Downloaded 1 time
-
- Administrator
- Posts: 8162
- Entry mode: Graphic
- Browsing: Text
- View their family tree
2 TYPE aka: This is a user defined tag used by Family Tree Maker. Each genealogy software has tags that they use for their own needs.
I'll ask the technicians if they can deal with it.
I'll ask the technicians if they can deal with it.
Best wishes,
Jean-Yves BAXTER
GeneaNet
Please read our help pages and tips to improve your genealogy research and to grow your family tree:
- https://en.geneanet.org/help/
- https://en.geneanet.org/genealogyblog/category/geneanet_tips
Jean-Yves BAXTER
GeneaNet
Please read our help pages and tips to improve your genealogy research and to grow your family tree:
- https://en.geneanet.org/help/
- https://en.geneanet.org/genealogyblog/category/geneanet_tips
Dear John,
Thank you very much for you message. It should be fixed soon.
However, could you explain why there is this code :
1 EVEN
2 TYPE aka
2 PLAC William Branscombe
What is the signification ?
in :
1 NAME Henry William /Branscombe/
2 SOUR @S82@
2 SOUR @S63@
3 _FOOT Neu-Ulm, Germany. 8.11.2001.
2 SOUR @S208@
3 PAGE Referred to as Henry Branscombe in this document.
1 SEX M
1 BIRT
2 DATE 1829
1 OCCU Rubber Merchant
1 ADDR
Sincerely yours,
Jacques
Thank you very much for you message. It should be fixed soon.
However, could you explain why there is this code :
1 EVEN
2 TYPE aka
2 PLAC William Branscombe
What is the signification ?
in :
1 NAME Henry William /Branscombe/
2 SOUR @S82@
2 SOUR @S63@
3 _FOOT Neu-Ulm, Germany. 8.11.2001.
2 SOUR @S208@
3 PAGE Referred to as Henry Branscombe in this document.
1 SEX M
1 BIRT
2 DATE 1829
1 OCCU Rubber Merchant
1 ADDR
Sincerely yours,
Jacques
-
- Posts: 17
- Entry mode: Graphic
- Browsing: Graphic
- View their family tree
Dear Jaques,
The gedcom file was created by Family Tree Maker 2019.
I have experimented with the AKA input fields in FTM. There are three: date, place and description.
In FTM it looks the same (a) if the AKA name is entered in place and description is blank as (b) when the AKA name is entered in description and place is blank. I had entered William Branscombe as 'place' rather than 'description' and did not notice any difference in FTM, but apparently it made the gedcom file look as it did.
Now I have entered the name as 'description' and it looks correct after upload into Geneanet.
If you can allow both alternatives in the gedcom file it would make it easier for FTM users who make the same mistake, but I realize it is a user error from your point of view. Sorry!
Kind regards, John
The gedcom file was created by Family Tree Maker 2019.
I have experimented with the AKA input fields in FTM. There are three: date, place and description.
In FTM it looks the same (a) if the AKA name is entered in place and description is blank as (b) when the AKA name is entered in description and place is blank. I had entered William Branscombe as 'place' rather than 'description' and did not notice any difference in FTM, but apparently it made the gedcom file look as it did.
Now I have entered the name as 'description' and it looks correct after upload into Geneanet.
If you can allow both alternatives in the gedcom file it would make it easier for FTM users who make the same mistake, but I realize it is a user error from your point of view. Sorry!
Kind regards, John
-
- Administrator
- Posts: 8162
- Entry mode: Graphic
- Browsing: Text
- View their family tree
The problem has been fixed. You just have to re-import your GEDCOM file.
Best wishes,
Jean-Yves BAXTER
GeneaNet
Please read our help pages and tips to improve your genealogy research and to grow your family tree:
- https://en.geneanet.org/help/
- https://en.geneanet.org/genealogyblog/category/geneanet_tips
Jean-Yves BAXTER
GeneaNet
Please read our help pages and tips to improve your genealogy research and to grow your family tree:
- https://en.geneanet.org/help/
- https://en.geneanet.org/genealogyblog/category/geneanet_tips
Dear John,bjcnagold wrote: ↑18 March 2021, 15:33 Dear Jaques,
The gedcom file was created by Family Tree Maker 2019.
I have experimented with the AKA input fields in FTM. There are three: date, place and description.
In FTM it looks the same (a) if the AKA name is entered in place and description is blank as (b) when the AKA name is entered in description and place is blank. I had entered William Branscombe as 'place' rather than 'description' and did not notice any difference in FTM, but apparently it made the gedcom file look as it did.
Now I have entered the name as 'description' and it looks correct after upload into Geneanet.
If you can allow both alternatives in the gedcom file it would make it easier for FTM users who make the same mistake, but I realize it is a user error from your point of view. Sorry!
Kind regards, John
We have fixed the problem.
Previously we have removed automatically the "2 TYPE aka".
for this kind of structure :
1 NAME Jono Slack
2 TYPE aka
But it broke also this structure :
1 EVEN
2 TYPE aka
2 PLAC William Branscombe
The fix remove only the first aka.
Sincerely yours,
Jacques
Geneanet